Paint and Stains
How to Maintain Exterior Paint and Stain?
It is very important to maintain stain coverage on the exterior wood surfaces. Although stain-work on the exterior horizontal surfaces is not covered by a warranty, it is important to refinish these areas to avoid damage to the wood.
Brilliant and dark colours, while providing adequate protection, may fade more rapidly on south and west exposures, and require frequent repainting to maintain their original appearances. Avoid painting in cold or damp weather. Try to paint in shaded areas, away from the direct sunlight. Ideally, one should begin on a surface that has been exposed to the warmth and drying action of the sun, and then “follow the sun around”. Follow the manufacturer’s recommendations for the best results. Vulnerable locations, such as windowsills, may require cleaning and “touching up” more frequently than other portions of the house.
What is Truman Homes' Policy on Interior Paint and Stain?
Truman Homes' policy on interior paint and stain is that no further painting will be done after possession, other than for defects existing at the time of possession. If lacquer touchups are needed, these are done with a brush as Truman Homes will not spray lacquer after possession. Walls, woodwork, and other surfaces are finished with products suited to their expected use and surfaces.
What are common Millwork issues and how to fix them?
Shrinkage will affect the interior wood trim and you may notice that some joints at the corners of windows, doors and baseboards will open slightly. These are normal occurrences that can be remedied with wood putty, plastic wood, coloured putty sticks or similar products when you decorate.
Paint & Stain FAQs
Question: Why does the stain on exterior horizontal surfaces wear more quickly than on other areas?
Answer: Exterior horizontal surfaces, such as decks and steps, are exposed to harsher elements compared to vertical surfaces. Factors like snow, rain, dirt, direct sunlight, and foot traffic contribute to the faster wear of the stain on these surfaces, while vertical surfaces are less exposed to such conditions.
Question: What is the best way to clean marks from painted surfaces?
Answer: For best results, spot clean only when necessary using a damp cloth with a highly diluted dish soap solution. Be gentle and avoid scrubbing, as this can damage the paint finish. It’s important to steer clear of cleaning products that contain ammonia, as they can harm the paint. Additionally, it’s recommended to wait at least three months after taking possession before cleaning the walls to allow the paint to fully cure.
